666

Avgit-tools

How to digitize your old VHS tapes. How to Digitize Video Cassettes. 5 Ways to Transfer VHS Tapes to DVD or Other Digital Formats. How to Convert VHS to DVD Easily. How to dub (copy) VHS tapes to DVDs

If you have some old cassette tapes lying around, it’s a good idea to digitize and back them up before they decide to show their age and stop working. In this guide, we’ll show how to convert your old collections to digital files, and the best practices for doing so. You are likely to have the boxes of home video VHS tapes that might contain different events of your life, exclusive musical gigs filmed or some other incredible things you witnessed years ago. 

It's time to breathe new life to them and bring them up to date Connect the adapter to your VHS player and your computer. The role of the adapter is essentially to connect the VHS player to your computer or laptop. One end will have A/V cables (the red, yellow, and white cables used to connect the VHS player to a TV) and the other end will have a USB port, typically. 


The times, when we recorded all the events on cassettes went by. But we still value weddings, childbirths, first steps kept in VHS format. To extend the life of your videos from VHS tapes, you’d better convert cassette tapes to DVD format. We will show you 2 easiest ways to convert VHS to DVD. First Way: Convert VHS to DVD using TV Tuner. You will need: Videotape recorder Double RCA cable RCA cable with an audio plug TV tuner Computer with Windows Movie Maker installed

What you need to do is: Turn the videotape recorder on and put the cassette into it. Plug both RCA cables with corresponding outputs to the videotape recorder and TV tuner. The audio plug should be put into TV tuner. Open Windows Movie Maker. In “Tasks” click on “Capture from video device”.

The process will take a lot of time and place on your PC. After the capturing is complete, you can go on creating a DVD disc in Windows Movie Maker or use Freemake Video Converter. Second Way: Convert VHS to DVD using a video camera and a USB capturer. You will need: Videotape recorder or a video camera, able to play old tapes. USB capturer Computer or notebook What you need to do is: Put the tape into a videotape recorder or a video camera. Connect the video-playing device with your PC, using a USB capturer. Such gadgets are usually accompanied by a driver disc. Install the drivers first. Install the drivers and follow the instructions. Start capturing the video from old tapes with the help of USB capturer. To convert output format into DVD you can use 


Install the software for your adapter. If your device comes with an installation disc, insert the disc and follow the instructions. 

· Alternatively, you can download and install any number of freeware applications that may offer more versatility. This is a good option if you acquired a used adapter that didn't come with software. VirtualDub is a free open-source video capture and editing program available. Huffyuv is another very fast lossless video codec available for free. 
Open the application on your computer. Insert the VHS tape and fast-forward (or rewind) to the portion of video you'd like to record. Generally, you'll be asked to "Start a New File." Name it something ("Video Project 1") and select your format from the file menu. 

· If you're using the open-source software, you'll also have to select your device from an accompanying list of capture devices. 

· Try playing the VHS tape at this point. You should be able to see it in a pop-up window for the software you've installed. Check the audio levels and frame rate, making any adjustments for playback quality. Then return to the portion of video you'd like to record. 

Hit "Record" on the software before pressing play on the VHS tape. Make sure the software is in capture mode before you start playing the video or you'll miss the first few seconds of the tape in your recording. This process will vary slightly depending on the software you've installed, but regardless you'll have to wait for the video to finish playing before moving on to convert the file to a DVD. When the video is over, open it in whatever video player you have installed on your computer to check for quality. If you want to edit the video at this point, you can open it in iMovie or a freeware program like VirtualDub and trim out any unwanted parts. 


· Make sure that the audio and video are in sync. If they are not, you can adjust the audio skew by selecting "Interleaving..." from the audio menu and entering a positive or negative number for the audio delay. When figuring out how much to delay the audio, it is helpful to select "Audio display" from the view menu. 

· After trimming the video and/or adjusting the audio timing, you can quickly save the edited video by selecting "Direct stream copy" under both the Video and Audio menus, then saving the file as a new AVI. 

Convert the AVI file to DVD or other digital formats. At this point, you've got a digital copy of your VHS tape that you can either or save on your computer. Popular software for burning DVDs follow: 

· For use on a Mac: Roxio Popcorn, Roxio Toast, and DVD2oneX are all popular burning software available. Burn by Sourceforge is a freeware program you can download and install.

· For a PC: Avidemux, DVDStyler, and ImgBurn are free open-source video editing programs available for download and installation 

Get a combo VHS-DVD player. While these will generally lack High-Def outputs and software packages, it's still the least-complciated way to transfer a VHS tape to DVD. 

A new combo player will probably run between $100-$200, but will probably be available for cheaper on eBay or craigslist. 

Alternatively, you can connect a separate VHS player to a DVD player with recording capabilities. For this, you'll need a regular set of two-directional Audio-Visual cables. Plug the outputs from the VHS player into the inputs from the DVD player and follow the rest of the instructions as if you were using a combo player. 

 Depending on the quality of your VHS tapes, this can be either an over-cautious step or a necessary one. If you're working with old irreplaceable family tapes or extremely dirty tapes you'll want to make sure that you're not going to ruin them by running them through the player.

Roll the protective tab back to reveal the magnetic tape. Forward the tape by turning the spindles and wiping the tape with a soft cloth or piece of cotton. 

If the tape is wrinkled or twisted, gently smooth it with the cloth. Turn the spindles the other way to run the tape out if it's severely twisted. Be very careful. 

Insert your VHS tape into the player and a blank DVD into the DVD player.Check the player's specifications about DVD formats, whether or not it will write over DVD-R discs or DVD-RW and make sure you've got the right kind of disc for your player. 


Press play and record. This process will vary depending upon your machine, but typically you'll need to press play on the VHS controls and hit record on the DVD controls. Often, though, there will be a single "record" button that engages the transfer process automatically. 

Run Soft4Boost Video Capture and select video format 

Note: first of all you will have to deal with connecting your VHS recorder/player to the computer using a video capture device as a go-between: 
If you use an external video capture board supplied with RCA and S-Video jacks, the best way to link the devices is to connect the VHS recorder/player S-Video outputwith the video capture board S-Video input using the corresponding cable so to relay a video signal. To relay an audio signal use an RCA cable, connecting yourVHS recorder/player RCA output with the video capture device RCA input but employing white and red jacks only. And then use a USB cable to connect the external video capture board to the computer USB port. 

If you have a DV-camera and your computer system is supplied with an IEEE 1394port then connect your VHS recorder/player to the DV camera just in the same way as it has been described above and then connect the DV camera IEEE 1394 portmarked as DV In-Out with the computer IEEE 1394 port using the corresponding cable. 


Attention! Actions relating to connecting devices should be done when they are off. 

For all the details concerning the possible ways of connecting devices, please, refer either to the User Manuals bundled with them or manufacturer support team. 

To do that find the corresponding program icon on your desktop and double-click it. If you unchecked the Create desktop icon box during the installation, you can run the program from the Start menu. Please follow Start > All Programs > Soft4Boost > Video Capture. Make sure you work with the Capture tab. By default output video format is set to Recommended (MPEG-2), since your final goal is to have your video in DVD format, that suits fine although there is no reason why you should not select Native or MPEG-2 (with some other presets) 

Assign an output folder 

Now define where the captured video should be saved to. Click Browse button from theOutput path section. Choose a directory to place the captured video in and name the file. Press Save. 

Define video device input 

Switch to the Settings tab. Drop down the Video Device Input control and choose either theComposite option in case your VHS player is connected to the capture device using anRCA input or the S-Video option if you preferred an S-Video jack 

Start Capture 

Note: before starting capture switch your VHS recorder/player on and check whether a VHS cassette is inserted into its compartment. If you use a DV camera as a capture device then: 
Switch the DV camera on. 
Make sure its cassette compartment does not contain a cassette. 
Enable the DV camera AV to DV feature (refer to User manual for details) and then switch it to playback mode. 
If you need to rip an old cassette from an answering machine or handheld recorder, this is the ideal guide for you. Keep in mind that the more you play a tape, the more its signal is degraded. Tapes are especially susceptible to heat, dirt, and magnetism, so get them converted while you can. 

Ideally, you’ll want to use a high-quality tape deck. Those things are hard to come by nowadays, so you may have to settle for just about any cassette player you can get your hands on. Since they’re rarely produced now, you may find an old one that has seen better days. Just make sure that it doesn’t have any playback problems before you begin. To test, make sure that there is no media currently in the player, plug in some head phones, and press play. Listen for static or other strange sounds – every sound that the player makes in this process will be recorded into your digital file. As long as you hear minimal noise (the less, the better), it should work fine. 

An appropriate sound card – You don’t need anything fancy, you just need to have a microphone jack on your computer. 

An environment free from electrical noise – Recording cassettes is an analog process, so any interference from nearby electronics is picked up and recorded as audio. Popping sounds and static are common in recordings that were done with their audio cable near power or RF sources. To test the amount of noise your environment is producing, make sure there is no tape in your player, plug it into your computer, and start recording. Listen for sounds other than the normal humming that playing a tape always produces to assess whether or not your other electronics are causing interference. 

How to Start Recording 

Now that you’ve got everything you need to get started, pop your cassette into the player and plug it into your computer. Lower quality devices will require you to use the headphone jack, but better devices will be equipped with a line out jack, which is what you’ll want to use if you have it. 

For line out, use a cable with two RCA jacks on one end and a 3.5mm headphone jack on the other. If you’re using a device that only has a 3.5mm headphone jack, use a cable with the 3.5mm plug on both ends. In the screenshot above, you can see we have a little more than a second of unnecessary noise (the time it took for us to hit play on the tape deck after we hit record in Audacity). The darker gray area is what we’ve highlighted and plan to delete. Repeat this process for the end of your recording until you’ve gotten rid of all the excess noise. 

After you’ve trimmed the excess and ensured that you got a quality recording (just hit play to hear what you’ve got), you can save the data into an audio file, such as MP3. Just go to File > Export to be presented with all the formats that you can save your data in. 

To compress your file into a reasonable size but still retain the maximum quality, select FLAC. For maximum compatibility and more compression, while still retaining a very reasonable amount of quality, select MP3. 

The next step was to tell the PowerBook that the audio input is from the line in rather than the internal microphone. This is done in the Sound panel in System Preferences in OS X. You can adjust the gain on the input with a slider. It should be set somewhere in the middle. 

Now you can play music on the cassette player and hear it play through on the computer’s speakers. Cue up the music you want to record.

Start up iMovie and begin a new project. Next, click the Sound button. I’m using iMovie 3. I expect this will also work in OS 9 and with earlier versions of iMovie, although the details may be different. 

In iMovie 3, there is a record button. I click the record button and then start the external music source. (If you use the pause button rather than the play button to start the music, you can avoid annoying clicks in the audio stream.) If there is an unusually long delay you can always edit it out with iMovie later. There is a 10 minute limit to the amount of sound you can record in this manner, but this should enable you to capture all but the longest songs. 

Once the sound is recorded, you will need to tell iMovie to “extract the audio” so you can export and edit it. You can get stuck on this point unless you remember to select the audio clip before extracting it. 

Next, export the clip. Normally this is a video export, but now it is just audio. When exporting, choose the QuickTime format and select expert settings. You can choose to export sound to AIFF or other formats. More compression means your file uses less hard drive space – but also a loss in quality. I think it would take considerable loss before I would notice a difference. AIFF with no compression is about the largest size file you can select. 

iMovie exports the entire movie, not just the selection, so make sure you have a single track with extra dead air trimmed before exporting. 

Now you can open iTunes, drag the sound to the library, and it will be copied to the library. You can access it as you normally would. You’ll have to enter the database information manually. 

Right, converting home VHS videos to DVD is the best way to backup, share and enhances those old tapes. Most of us have old VHS home videos that have been placing in a shelf and collecting dust for long time. These home movies is one of the most common reasons people start video editing. This article will show you how to convert your VHS tapes to DVD. 

The mainstream approach for converting VHS to DVD is either using a PC DVD burner or a set-top DVD recorder. The way of a set-top-DVD recorder working is that to record from television, or duplicate VHS tapes or camcorder tapes in their entirety to DVD. It's easy but lack of flexible. No video editing such as merge videos into one or add subtitle, just a duplication, keeping the video content exactly the same as the original. By using a PC DVD burner is that converting VHS to computer as a common digital video, so that you can do it whatever you want on PC and then burn it to DVD. It takes more steps but you take the whole control on the video. In fact, many people would like to keep the VHS video on computer for sharing it online or burning DVD, much flexible than previous one. 
Transfer VHS to computer 

There are several ways to transfer VHS video to computer (analog video to digital video). The most common one is that using a TV Tuner card. I assume that you have connected between DVD player and your computer. 


Now, install any TV recording application and the driver on your PC (some of TV Tuner card may include such software). Alternatively, if you already have a Windows Media Center PC, you do not need any additional applications. (It will ask you to restart your computer after installing the device drive.) 

Turn on the TV and VCR, put in the VHS tape that you want to record. Use the record feature of the software to start recording. Choosing MPG or AVI as output video format will keep good video quality and relative small size. 
Convert VHS video to DVD 

Once you have got the video from VCR, the next step is that converting VHS video to DVD with DVD Creator. It can burn popular video format (.avi, .mpg, .mp4 etc.) to DVD directly. Therefore, you don't have to convert VHS video to DVD format (mpge2) for burning a playable DVD movie on your home DVD player. Here I will show you how to burn a DVD from VHS recordings step-by-step. 

Pre-requirement: A blank DVD disk (DVD +R, DVD-R, DVD+RW or DVD-RW), rewritable DVD-ROM, A VHS to DVD converter – DVD Creator. 

The first step is to import VHS files that need to be burned onto a DVD. Select/drag the VHS file into the main interface of D DVD creator. You could check the video size on the measure bar on the bottom. Make sure it doesn't exceed the total DVD capacity. 
2DVD menu making 

Click "Menu Template" to customize your DVD menu. There are different styles of built-in templates, frames and buttons for your choice. To apply a template, frame or button, you can just double click it. You can even add text, background music and background image to customize the menu. 

Previewing VHS video 

Just for make sure everything goes as your plan you could have a video preview before burning it to DVD. 
3Convert VHS to DVD 

Now you can convert to DVD disk. Go to set TV Standard (PAL/NTSC) on "Setting" option and output Aspect Ratio (4:3/16:9) on "DVD setting bar". Click "Burn" and then select your DVD drive (if you have more than one DVD drive on PC) and Click "Start" to burn your project. 

Tips: The volume of DVD use is shown on the bottom side. You can select DVD type of "D5" or "D9". If the video size is exceed the DVD capability you can reduce it by setting output quality. E.g. select "high quality" instead of "Best performance". And the application also can transfer other common Video files like WMV MPEG MOV FLV MKV M2TS, etc to DVD for playback on DVD Player and is fully compatible 

How to digitize your old VHS tapes. How to Digitize Video Cassettes. 5 Ways to Transfer VHS Tapes to DVD or Other Digital Formats. How to Convert VHS to DVD Easily. How to dub (copy) VHS tapes to DVDs