666

Avgit-tools

How to make a Knuckle Duster. How to make a Patent Boxer Style Knuckle Duster. How To Make Real Brass Knuckles - Photos and instructions

In the United States they're known as " brass knuckles", also sometimes called " knucks " or " knuckle dusters " (more common in British English), and translated from German they are called " punch rings ".

A less known form of artificial knuckles are known as "sap gloves ". Sap gloves are leather gloves filled with bars of lead or lead powder. For years boxers have used them secretly, along with brass knuckles, to gain an unfair advantage over their opponents.




Brass knuckles are commonly believed to have evolved from the ancient Roman " caestus ", a type of glove or hand guard made from leather and metal used during boxing matches in gladiatorial events. Unlike modern day boxing gloves which are used to muffle the fist of fighters and thus lessen bodily harm, the caestus was used to intensify the damage caused by a punch or blow.

A cestus is an ancient battle glove. In effect, it is the Classic world's equivalent to brass knuckles, sometimes used in pankration.

The first version of a cestus was a series of leather thongs that were tied over the hand. Greeks used them in their hand-to-hand competitions, where only knock out mattered.
In Roman Latin, cestus referred to leather that was wrapped or bound over anything, including items like belts. Romans modified the leather thongs by adding metal parts, including studs and iron plates.Some of them had fixed spikes over the knuckles.

More dangerous versions of the same weapon included the myrmex or "limb-piercer", and the originally Greek sphairai, thin leather thongs with cutting blades.

Cesti were usually used in gladiator bouts where otherwise unarmed combatants - usually slaves - fought to the death. This form of boxing became increasingly bloody until the cestus was officially banned in the 1st century BC. Hand-to-hand fighting was banned in 393 AD.
The most famous depiction of the cestus in sculpture is The Boxer of Quirinal, in Rome. The sitting figure is wearing cesti on his hands.



A similar weapon, the " tekko ", is one of the traditional weapons of kobudo, a martial art from Okinawa, Japan. They were used mostly by martial artists, and they are still used today and are usually fashioned out of wood, metal or whatever else may be handy.

Tekko was originally a type of horseshoe. It is said that farmers kept one always on hand, and it could be a very effective tool in fighting any enemy immediately. It was also handy to carry.It went through various modifications as a self-defense tool to be used whenever a situation calls for an instant reaction until it acquired its present shape.
Historically, brass knuckles are weapons used in hand-to-hand combat. Basically, brass knuckles are pieces of metal, usually steel despite their name, shaped to fit around the knuckles. Designed to deliver the force of punches through a smaller and harder contact area they result in greater tissue disruption and increased likelihood of fracturing the victim's bones on impact. Also, the wielder of such a weapon may punch harder than normal, exacerbating damage even further, due to reduced subconscious anxiety about harming their own hands when striking. Often made in factories in Pakistan or China, brass knuckles typically are constructed out of aluminum or steel .

Chrome or brass paint, or whatever color is then applied. Truly brassbrass knuckles are rare due to the weight and expense of brass, which can range up to $80 + for one pair! Some knuckles are also made of plastic which can serve the same purpose as the metal variety but are much lighter and less likely to be detected. You can check and see that we sell a few of these.
All of our metal knuckles are made of steel. Some of our competition sells only aluminum knuckles, so watch out.

Common varieties are spiked knuckles, "fat boys", "wedding rings", brass knuckles donned with a longhorn steer on the knuckles, brass knuckles with lions or skulls on the knuckles, etc..

Spiked knuckles are seen to be of the most vicious variety of brass knuckles as they not only can shatter bone into fragments but will shred tissue. The length of the spikes varies from as small as a quarter of an inch to up to 6 inches. Shorter spikes emphasize the impact of the brass knuckle while longer blades are used solely to inflict tissue damage.

How to make a Knuckle Duster. How to make a Patent Boxer Style Knuckle Duster. How To Make Real Brass Knuckles - Photos and instructions. Brass knuckles are fierce weapons and should always be treated as such. They are easy to conceal, easy to carry, and effective when used to stop an assailant or ward off a hand-to-hand attack. Though they are illegal in most countries, France being one of the notable exceptions, they still enjoy a brisk flea market and online trade.



To avoid legal complications, they are typically sold as "decorative" pieces or belt buckles. Though it takes some doing, a pair of brass knuckles can be made by any enthusiastic collector.

Instructions

o 1


Draw the template for your brass knuckles on your metal plate using either a permanent marker or a wax pencil. There are a wealth of styles and shapes for brass knuckles, but the most common is the "smiling mouth" template (see photo).

o 2

Clamp the metal plate in a bench vise. Make sure your hand-drawn template is not obscured in any way by the vise.

o 3


Attach the high-speed steel cutter bit to the Dremel and put on your eye protection.

o 4

Activate the Dremel and pierce the metal plate at the center of any of the finger holes you drew for the template.

o 5

Starting from the center of the finger hole, cut up to the edge of the template and then around the entire inner ring. That's one finger hole drilled out. Pull out the steel cutter bit and proceed to the next finger hole.



o 6

Repeat Steps 4 and 5 for each finger hole and the signature "smiling face" of the grip.

o 7

With all the inner cuts made, now pierce the metal plate approximately 1/8 of an inch from the outer edge of the template.

o 8

Cut around the outer edge of your drawn template until the brass knuckles are cut free from the metal plate.

o 9

Remove the steel cutter bit and replace with the 100-grit sanding bit.

o 10

Remove the remnants of the metal plate from the bench vise and clamp the brass knuckles in place.

o 11

Activate the Dremel and smooth out the finger holes, the "smiling face," and the outer edges of the brass knuckles. How smooth or rough you want your final knuckles is a matter of personal preference.



o 12

Use a wad of grade 2 steel wool to smooth out your brass knuckles and give them a high-gloss shine.

Brass Knuckles [In the generic grouping of "Knuckledusters."] have a long and bloody history in both Europe and The United States. Probably a lot of other places as well. Carrying them on your person in virtually any State in this Country would amount to an instant arrest if searched. You would be very lucky to get away with a confiscation and a verbal warning…very lucky.


In my youth, there were many people in the neighborhood and in Baltimore City that packed a pair of "Knucks." They are sold to this day in the same places they were in my youth. Flea Markets all around the area have "Brass Paperweights." Some of them are supplied with a tiny little piece of threaded metal that screws into a matching hole so they can be picked up easily off of a stack of papers on your desk. Makes them a real cool paperweight in fact!They are neat and a great conversation piece.

I think it is safe to assume that wherever there are Flea Markets or Swap Meets, etc., you are going to find dumptruck loads of brass knuckles, various flat and round blackjacks [saps] and cheap overseas rip-offs of ASP Telescoping Batons. I've watched a lot of punks and wannabe gangbangers buying them…so beware. They ain't collectors, they're users…



The bloody world of pummeling people with Knucks has a long history as I said before. These things are brutal weapons and have a sinister reputation.

The reason they were banned is because we have a problem, as a society, of blaming inanimate objects for the acts of predatory or stupid human beings.That is primary. More than that, they were banned because they are effective at what they do, which is damaging people.

Brass knuckles, also sometimes called knuckles, knucks, brass knucks, or knuckledusters, are weapons used in hand-to-hand combat. Brass knuckles are pieces of metal, usually made of steel despite their name, shaped to fit around the knuckles. Designed to preserve and concentrate a punch's force by directing it toward a harder and smaller contact area, they result in increased tissue disruption, including an increased likelihood of fracturing the victim's bones on impact. The extended and rounded palm grip also spreads across the attacker's palm the counter-force that would otherwise be absorbed primarily by the attacker's fingers, reducing the likelihood of damage to the attacker's fingers.



Metal ring and knuckle style weapons date back to ancient times and have been used all over the world for many hundreds of years. Cast iron, brass, lead, and wood knuckles were made in the United States during the American Civil War (1861–1865). Soldiers would often buy cast iron or brass knuckles and if they could not buy them they would carve their own from wood or make a mold in the dirt and cast them at camp by melting lead bullets.

By the late 19th century, knuckledusters were incorporated into various kinds of pistols like the Apache revolvers used by criminals in France in the late 19th century to early 20th century.[2] During World War I the US Army issued two different knuckle knives, the US model 1917 and US model 1918 trench knives. Knuckles and knuckle knives were also being made in England at the time and purchased privately by British soldiers. By World War II, knuckles and knuckle knives were quite popular with both American and British soldiers. The Model 1918 trench knives were reissued to American paratroopers and British Commandos even had their very own "Death's Head" knuckle knife featuring a skull-shaped brass knuckle handle. Some knuckledusters have rounded rings which increase the impact of blows, however some can be particularly dangerous having spikes, sharp points and cutting edges at the point of impact to cause serious injury.

Brass knuckles have many different nick-names B-Nux, Knucks, Knuckle Dusters, but are most commonly refered to as Brass Knuckles. They are designed to inflict maximum damage while at the same protected the fingers, knuckles, and bones in the hand.

Brass Knuckles most likely were derived from the ancient Roman "caestus" a glove that was constructed of leather and metal and used during boxing matches by the gladiators.

Basically this was the first brass knuckle and it inflicted brutal punishment in the ring. Later the cestus came along and extended all the way down the arm and with leather. Romans would commonly put metal spikes and other dangerous adjustments on the weapon to make it even more effective.

The history of Brass Knuckles is steeped in folk lore and popular culture. Almost every type of ancient warrior had some form of the modern brass knuckle.

Brass Knuckles are made all over the world and typically are constructed from Stainless Steel and then heated to add different colors or designs. Many forms of Brass Knuckles exist such as: Spiked, Se-rated, Lexan, roped, and many more.

Some brass knuckles are still constructed from real brass and can be found here on this website. We offer brass knuckle paperweights for sale and you can buy them from American Made Knuckles by clicking on any one of our knuckles on our brass knuckles page!

Ultimately, Brass Knuckle History goes back thousands of years and have proven to be an effective self defense measure for quite some time.